cart Shopping Cart You have (0) items

NZ $82.40
Convert Currency

Number of Wires*
Head Size and Type*
Temperature Range*
Stem Lengths for RTD*
In Head Transmitter- Must use Large Head
Probe Fittings*

¼" dia RTD Probe with Head

Use the selection to customise your probe.
Contact Teltherm for technical assistance or if you require options that are not shown.

The standard design is a PT100 sensor c/w 150 mm long stem and a small head.
If a transmitter is required a large head must be selected.
Select the 4 wire option for best accuracy.

The aluminium head is IP67 and provides ease of installation. Wire from the process controller are attached to terminals in the RTD head allowing probes to be replaced easily in the field.

RTD probes are generally more accurate than thermocouples and best used for temperature ranges of -40 °C to 600 °C. For temperatures above 500 °C consider choosing a thermocouple.

Our standard RTD sensors are Class A. Should you require better accuracy contact Teltherm to order 1/10 Din.

Teltherm supply hand held thermometers, controllers and indicators in order to provide the readouts for your customised probes.

Teltherm manufacture a large range of temperature probes including thermocouples and platinum resistance thermometers (RTDs, PT100s, PT1000s).

For added confidence and traceability select an IANZ certificate.


If you are not sure what you are after or are in a hurry, call us today and talk to an expert on industrial instruments.

send questions


+64 9 633 0040
5 / 343 Church Street | Onehunga
Auckland 1061, New Zealand