Temperature Gauge 100 mm VP
The model 6A is a 100 mm, 4" diameter, bottom entry vapour pressure thermometer with a glass filled nylon case & a 2 mm OD nickel plated copper capillary.
The sensing bulb is 12.7 mm diameter x 90 mm long. The standard length capillary is 2 metres but lengths up to 30 m available on request. The 6A is wall mounted.
Single scale °C dials are standard but °F scales are available on request. Vapour Pressure thermometer scales are logarithmic - the working temperature should lie between 10 and 2 o'clock on the dial.
This thermometer is suitable for temperature measurement where remote measurement & fast response is required such as the refrigeration industry.
Accuracy of this model is ± 1.5 % of the scale range in accordance with British Standard 1041.
N.B. Use a pocket or thermowell to protect your temperature instruments from process systems where pressure, velocity, or viscous, abrasive and corrosive materials are present. A thermowell allows safer removal of an instrument at the time of replacement, repair or testing without affecting the process system.
NZ Teltherm thermometers are manufactured to exacting quality standards. Teltherm's manufacturing processes are accredited by Telarc to ISO 9001. These thermometers will give continued reliable service & have serviced Australia and New Zealand industry for over 15 years.
For customised product including gauges with NATA & IANZ Test Certificates, allow approximately 3 days for delivery to NZ and Australia. For urgent delivery contact us as same day delivery is possible by arrangement.