Enquire for price
ST 3000 Series 100 Absolute Pressure
Honeywell's ST 3000 Series 100 Absolute Pressure Transmitters transmit an output signal proportional to the measured variable in either an analogue 4 to 20 mA format or in a digital DE protocol format for direct digital integration with Honeywell's TDC 3000®X control system.
Consult the attached pdf for full specifications. Contact Teltherm for technical assistance.
Additional protocol options available for the ST 3000 Series 100 transmitters include FOUNDATION™ Fieldbus1 and HART® 2. See the Model Selection in the attached pdf.
You easily select the analogue or digital transmission format through the Smart Field Communicator (SFC) which is the common handheld operator interface for Honeywell's Smartline Transmitters.
All configuration, operation, and communications functions are under the control of the ST 3000 Smart Transmitter's microprocessor and are accessible through the SFC.
The measuring means is a piezoresistive sensor which actually contains a pressure sensor and a temperature sensor.
The ST 3000 transmitter can replace any 4 to 20 milliampere output transmitter in use today, and operates over a standard two-wire system.
You can connect the SFC anywhere that you can access the transmitter signal lines, and it provides the capabilities of transmitter adjustments and diagnostics from remote locations, such as the control room.
The single-board electronics is replaceable and interchangeable with any other ST 3000 Series 100 and Series 900 model transmitter.