The Class A, RTD sensor element is standard. Contact Teltherm if 1/10 DIN is required. The sensor is positioned at the tip of the sheath and requires an immersion of >50 mm.

Contact Teltherm if you require technical assistance or if you require options that are not shown.

The stainless steel probe's stem diameter is ¼".
2 or 3 or 4 wires selectable. Chose 4 wire for the best accuracy.
The 1 metre lead is teflon insulated and has connecting tails.

Probe stem length is selectable up to 300 mm, if a longer stem is required please contact Teltherm.

The sensor is rated up to 600 °C at the tip and is terminated with a pot seal rated to 135 °C which allows the attachment of the 1 metre long Teflon extension lead.

Teltherm supply hand held thermometers, controllers and indicators in order to provide the readouts for your customised probes.

Teltherm manufacture a large range of custom made temperature probes including thermocouples. Our quality and dlivery times are enviable.

For added confidence and traceability select an IANZ certificate.